Keep your gate, driveway, or access point safe and secure with the Merlin Outdoor Reflector Protector System. These infrared safety beams are made for Australian conditions, rain, shine, dust, or wind, and make sure your automatic gate or door stops the moment something crosses its path.
Features:
- All-weather protection (IP65 rated): Fully sealed against dust and water, these beams are ready for even the harshest Aussie environments.
- Reliable infrared detection: An invisible IR beam detects when something breaks its path, instantly triggering your gate to stop or reverse.
- Simple reflector design: Mount the beam on one side and the reflector on the other, no extra wiring or power needed across the driveway.
- Tough, UV-resistant build: Made with UV-stable materials and a weatherproof casing that won’t crack or fade under the hot sun.
- Easy compatibility: Works perfectly with most gate and door automation systems, including Merlin, ATA, and B&D.
Perfect for:
- Residential driveways and gates
- Commercial access points and carparks
- Properties with kids or pets
- Harsh outdoor or coastal environments
Compatibility:
Merlin:
- Slide 600
- Swing A200
- Swing L300
- MR555MYQ
- MR655MYQ
- MR855MYQ
- MJ3800MYQ
- MS65MYQ
- MS105MYQ
- MS125MYQ
- MS135MYQ
Gfrico:
- LR-Drive
- LG-Drive
- E-Drive +2.0
- E-Drive MYQ
- S-Drive
- LS-Drive (Post Jan 2019)
Technical Specifications:
- Protection Rating: IP65
- Beam Type: Infrared, active–reflector system
- Operating Range: Up to 10 metres (depending on conditions)
- Power Supply: 12–24V AC/DC
- Current Draw: Low power consumption (<50mA typical)
- Operating Temperature: –20°C to +60°C
- Response Time: <30ms
- Alignment Tolerance: ±5° horizontal and vertical adjustment
- Housing Material: UV-resistant polycarbonate / ABS blend
- Mounting Options: Wall or post mounting with adjustable brackets
- Cable Entry: Rear or bottom entry for flexible installation
- Indicator LEDs: Power and beam alignment status
- Relay Output: Normally open (NO) / normally closed (NC)
- Dimensions: Approx. 70 mm (W) × 75 mm (D) × 100 mm (H)
- Weight: Around 150 g (per unit)
- Compliance: Meets AS/NZS gate and door automation safety standards
WARNING! This product may contain a button/coin cell battery. To prevent possible SERIOUS INJURY or DEATH:
- Keep new and used batteries out of reach of children at all times.
- Do not use the product if the battery compartment is damaged or doesn’t close securely.
- Dispose of used batteries immediately and safely - even flat batteries can cause harm.
- Do not ingest the battery. Chemical burn hazard.
- Act fast if you suspect a battery has been swallowed or inserted - severe or fatal injuries can occur within 2 hours.
- Seek immediate medical attention or call:
– Australia: Poisons Information Centre on 13 11 26
– New Zealand: National Poisons Centre on 0800 764 766
Remote Pro supplies aftermarket products designed to be compatible with and to suit a wide range of original brands. Unless a product is expressly stated to be genuine, all items sold on this website are not manufactured, authorised, endorsed, or approved by the original equipment manufacturers (OEMs).
References to brand names, trademarks, or model numbers are used solely to indicate compatibility or suitability for use with the respective equipment. Remote Pro is not affiliated with, sponsored by, or associated with any of these brand owners, and no OEM approval or endorsement is implied.
All trademarks, brand names, and product names remain the property of their respective owners. Remote Pro distributes a range of aftermarket products, including but not limited to remote controls compatible with garage and gate motors and receivers produced by other manufacturers, as well as substitute automotive keys, remote controls, and casings designed to be compatible with vehicles made by other manufacturers.