These infrared photobeam curtain/barrier sensors are ideal for mounting in areas with limited space such as windows, doorways, skylights, and fence tops.
They are well-suited for both indoor and outdoor perimeter security. The triggering mechanism can be programmed to simultaneously detect the breaking of either a single beam or two adjacent beams. The sensors boast a robust aluminum build and incorporate an anti-tamper circuit that triggers an alarm in the event of power loss or if the end cap is tampered with.
These sensors do not necessitate synchronising wires, and their installation is facilitated by an LED alignment indicator. Additionally, L-brackets and mounting hardware are provided for your convenience.
Technical Specifications:
- Voltage: 12~24VDC
- Standby Current: 89mA
- Active Current: 73mA
- Max. range: 8m outdoor, 16m indoor
- Output: NO./NC. relay output, 1A @ 12~24VDC
- Operating temperature: -49° ~131° F (-45° ~55° C)
- Attenuation LED: (On): powered, aligned properly, (Flash): when beam is broken, (Off): no power
Dimensions:
- Length: 22-1/2" (57cm)
- Width x Height: 15/16" x 7/8" (33.5 x 22.3mm)
Warranty: 12 months
Remote Pro
WARNING! This product may contain a button/coin cell battery. To prevent possible SERIOUS INJURY or DEATH:
- Keep new and used batteries out of reach of children at all times.
- Do not use the product if the battery compartment is damaged or doesn’t close securely.
- Dispose of used batteries immediately and safely - even flat batteries can cause harm.
- Do not ingest the battery. Chemical burn hazard.
- Act fast if you suspect a battery has been swallowed or inserted - severe or fatal injuries can occur within 2 hours.
- Seek immediate medical attention or call:
– Australia: Poisons Information Centre on 13 11 26
– New Zealand: National Poisons Centre on 0800 764 766
Remote Pro supplies aftermarket products designed to be compatible with and to suit a wide range of original brands. Unless a product is expressly stated to be genuine, all items sold on this website are not manufactured, authorised, endorsed, or approved by the original equipment manufacturers (OEMs).
References to brand names, trademarks, or model numbers are used solely to indicate compatibility or suitability for use with the respective equipment. Remote Pro is not affiliated with, sponsored by, or associated with any of these brand owners, and no OEM approval or endorsement is implied.
All trademarks, brand names, and product names remain the property of their respective owners. Remote Pro distributes a range of aftermarket products, including but not limited to remote controls compatible with garage and gate motors and receivers produced by other manufacturers, as well as substitute automotive keys, remote controls, and casings designed to be compatible with vehicles made by other manufacturers.