X-Horse BMW Calculator remote Tool
Compatible

X-Horse BMW Calculator remote Tool

Xhorse
SKU: VVDIBMW
Limited Stock
Price:
$2,112.00

VVDI BMW Tool Funtions 

1. Support  E chassis/F chassis Programming function
2. Support E chassis / F chassis code function
3. OBD key Key: Support CAS1/CAS2/CAS3/CAS3+/ISTAP/ etc.
4. File Generation Key: Supports CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+, etc.
5. Support FEM/BDC system to generate keys, replace FEM/BDC control unit, support reset mileage
6. Supports mileage correction CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+
7. Support for reading EEPROM and sync data for CAS1/CAS2/CAS3/CAS3 systems
8. Support simultaneous engine and CAS, synchronous ELV and CAS
9. Support reading SN data from the engine
 
What's the difference between VVDI2 BMW and VVDI BMW?
Vvdi for bmw has possibility for coding and changing cars vo and retrofit options.
vvdi bmw not only for locksmith, it has functions of coding and programming and much more.
Vvdi for bmw has possibility for manual coding and changing cars vo (vehicle order ) , emergency flash and retrofit options
 
What does the VVDI BMW do that the VVDI2 to does not?
It has functions of coding and programming and much more
 
Coding and programming enabled?
vvdi bmw not only for locksmith, but it has functions of coding and programming and much more

BMWTOOL release V1.4.7 version. It require download latest configuration V1.0.2

************************************************************************
*** 2019-12-26 
*** Require firmware V1.4.3 
***********************************************************************
===== BMW V1.4.7 =====
1. Improvement for E-Series coding and programming-Bugfix for E65
2. Improvement for F-Series coding and programming-Support select target version manually
3. F/G-Series support update I-step
4. Bugfix for G-Series identification
5. Improvement for FEM/BDC prepare dealer key
6. Improvement for CAS4 prepare dealer key
7. Add transponder function: Menu->Special Function->Transponder Read/Write support HITAG2, HITAG3
8. Support chassis classify, VIN decode function
9. Add special function for F/G series: Reset engine start, switch off transport mode, reset ELV, write SVT, initialize Flexray etc.

 

Remote Pro

WARNING! This product may contain a button/coin cell battery. To prevent possible SERIOUS INJURY or DEATH:

  • Keep new and used batteries out of reach of children at all times.
  • Do not use the product if the battery compartment is damaged or doesn’t close securely.
  • Dispose of used batteries immediately and safely - even flat batteries can cause harm.
  • Do not ingest the battery. Chemical burn hazard.
  • Act fast if you suspect a battery has been swallowed or inserted - severe or fatal injuries can occur within 2 hours.
  • Seek immediate medical attention or call:
    – Australia: Poisons Information Centre on 13 11 26
    – New Zealand: National Poisons Centre on 0800 764 766

Remote Pro supplies aftermarket products designed to be compatible with and to suit a wide range of original brands. Unless a product is expressly stated to be genuine, all items sold on this website are not manufactured, authorised, endorsed, or approved by the original equipment manufacturers (OEMs).

References to brand names, trademarks, or model numbers are used solely to indicate compatibility or suitability for use with the respective equipment. Remote Pro is not affiliated with, sponsored by, or associated with any of these brand owners, and no OEM approval or endorsement is implied.

All trademarks, brand names, and product names remain the property of their respective owners. Remote Pro distributes a range of aftermarket products, including but not limited to remote controls compatible with garage and gate motors and receivers produced by other manufacturers, as well as substitute automotive keys, remote controls, and casings designed to be compatible with vehicles made by other manufacturers.

You may also like