A quality aftermarket garage door weather seal designed to suit selected B&D garage doors, particularly doors manufactured from approximately 2016 onwards.
The wide rubber profile helps create a better seal between the bottom of the garage door and the floor, reducing the entry of dust, leaves, insects and other debris. It’s also a great option for garages with uneven or tapered floors, as the wider seal can generally help compensate for gaps of around 30–40mm, depending on the shape and slope of the floor.
Replacing an old, hardened or cracked bottom seal can improve both weather protection and the overall finish of the door.
This is an aftermarket compatible product and is not a genuine B&D part.
Important – Check Your Existing Seal Before Ordering
B&D garage doors have used different weather seal profiles over the years, so the year of the door alone is not enough to confirm compatibility.
Before ordering, remove a small section of your existing weather seal and compare the groove/T-section profile with the product images. The section that slides into the aluminium channel must match for the seal to fit correctly.
Key Features
- Aftermarket weather seal designed to suit selected B&D garage doors
- Generally suited to compatible doors manufactured from approximately 2016 onwards
- Wide rubber profile
- Helps reduce dust, leaves, insects and debris entering the garage
- Helps compensate for uneven or tapered garage floors
- Suitable for floor gaps of approximately 30–40mm in many applications
- Replaces worn, cracked or hardened bottom seals
- Flexible design helps conform to the garage floor
- Available in multiple lengths
Available Lengths
- 1 metre
- 3.2 metres – suitable for many single garage doors
- 5.5 metres – suitable for many double garage doors
- 40 metre full roll
Specifications
- Product Type: Garage Door Bottom Weather Seal
- Material: Flexible Rubber
- Seal Width: Approx. 100mm
- Installation: Slides into compatible bottom weatherstrip channel
- Product Type: Aftermarket / Compatible Replacement
Compatibility Guide
- Designed to suit selected B&D garage doors
- Primarily intended for compatible wide-style weatherstrip systems used from approximately 2016 onwards
- Always compare the groove/profile of your existing seal before ordering
- Not suitable for all B&D garage doors
- Not a genuine B&D product
WARNING! This product may contain a button/coin cell battery. To prevent possible SERIOUS INJURY or DEATH:
- Keep new and used batteries out of reach of children at all times.
- Do not use the product if the battery compartment is damaged or doesn’t close securely.
- Dispose of used batteries immediately and safely - even flat batteries can cause harm.
- Do not ingest the battery. Chemical burn hazard.
- Act fast if you suspect a battery has been swallowed or inserted - severe or fatal injuries can occur within 2 hours.
- Seek immediate medical attention or call:
– Australia: Poisons Information Centre on 13 11 26
– New Zealand: National Poisons Centre on 0800 764 766
Remote Pro supplies aftermarket products designed to be compatible with and to suit a wide range of original brands. Unless a product is expressly stated to be genuine, all items sold on this website are not manufactured, authorised, endorsed, or approved by the original equipment manufacturers (OEMs).
References to brand names, trademarks, or model numbers are used solely to indicate compatibility or suitability for use with the respective equipment. Remote Pro is not affiliated with, sponsored by, or associated with any of these brand owners, and no OEM approval or endorsement is implied.
All trademarks, brand names, and product names remain the property of their respective owners. Remote Pro distributes a range of aftermarket products, including but not limited to remote controls compatible with garage and gate motors and receivers produced by other manufacturers, as well as substitute automotive keys, remote controls, and casings designed to be compatible with vehicles made by other manufacturers.